Vacuum Emulsifying MixerBrand : HLT
Product origin : Shenzhen,China
Delivery time : 3 weeks after order confirmed
Supply capacity : 100 sets/month
Applicable to the cosmetics factory, the drug cream, cream products production, especially for the matrix viscosity, solid content of the material is relatively high material preparation more effective.JL vacuum emulsifier to introduce advanced technology, according to the cosmetics, ointment products, the professional design of the paste, the unit by the pretreatment pot, vacuum emulsification mixing pot, vacuum pump, hydraulic system, pouring system, electrical control system, And so on. The operation of this group is simple, stable performance, good homogeneous performance, high production efficiency, convenient cleaning, reasonable structure, small footprint, high degree of automation.
1.Complex scraping board blending oar is suitable to every kind of complicated recipe and achieve optimizing effect;
2.Polytetrafluoroethylene scraping board cater to body of blending groove and scrape out viscosity material on boiler wall;
3.Homogenizer is installed on boiler bottom to increase motor power more thoroughly and strongly. During few production, it can exert homogenizing effect fully;
4.Mightiness balance isotactic curve rotor is matched with stator with corresponding structure to realize liquid high-capability cut,rubbing,centrifugal to make sure exquisite and slick cream; boiler body and pipe surface mirror polishing 300EMSH (sanitation grade) accords with Daily Chemical and GMP regulation.
5.Customer can choose frequency conversion timing homogenizer and highest rotate speed is 4500 r/min.
|Emulsifying Pot||Design Volume(L)||150||250||350|
|Scraper Stirring Power(KW)||1.5||2,。2||2.2|
|Scraper Stirring Speed(rpm)||0-86||0-65||0-65|
|Homogenizer Power( KW )||4||4||4|
|Homogenizer Speed (rpm)||2800||2800||2800|
|Electrical Heating Power( KW )||6||12||12|
|Degree of vacuum（mpa）||-0.098||-0.095||-0.095|
|Power( KW )||0.55||0.75||0.75|
|Electrical Heating Power( KW )||6||8||12|
|Oil Pot||Design Volume (L)||75||130||200|
|Power ( KW )||0.55||0.75||0.75|
|Electrical Heating Power ( KW )||6||8||12|
|Dimension||Overall(L* W* H)mm||2500*1800*2488-3400||2570*1900*2480-3480||2950*2720*2750-3850|